Marketing Mix Modelling Basics for Australian Businesses
Marketing Mix Modelling Basics for Australian Businesses

Marketing mix modelling (MMM) is a statistical method that uses your past sales, ad spend and outside factors like pricing and seasonality to estimate how much each marketing channel contributed to sales. It works on totals by week, not on individual clicks, so it does not need cookies or pixels. It suits businesses with a few years of history and meaningful variation in spend. If you are earlier than that, there are cheaper ways to find out what your ads are returning.
I’m Jesse, a senior paid media specialist at Senior Ad Managers. Below is how MMM works, what it needs, where it fits next to attribution, and how an Australian business can decide whether to start.
TL;DR
- MMM is a regression-style analysis of aggregate weekly data that estimates each channel’s contribution to sales, alongside price, promotions, seasonality and other outside factors.
- Most models need roughly two to five years of weekly data, and spend has to move up and down for the model to learn anything.
- MMM and attribution answer different questions. MMM looks at the whole mix over time, and attribution follows individual customer journeys. Industry bodies recommend using them together.
- Smaller accounts often get more from clean conversion tracking tied to CRM revenue, plus a well-run Google Ads and Meta Ads account, before they commission a model.
- If you do commission one, define the business questions first and calibrate the model with experiments.
Table of Contents
- What marketing mix modelling is
- The basic equation in plain English
- Two ideas that make MMM different: carryover and diminishing returns
- What data you need
- How MMM differs from attribution
- Where MMM helps with budgets
- Where MMM runs into trouble for smaller businesses
- What to do first if you are not ready
- How to get started with MMM in Australia
- Where our audit fits
- Our view on MMM
- FAQ
- Sources
What marketing mix modelling is
IAB Australia describes MMM as a statistical analysis of aggregate sales, advertising and marketing data, plus data on factors outside a marketer’s control. It quantifies the impact of channels and tactics on outcomes such as sales over time, using econometric techniques.
The key word is aggregate. A model doesn’t track Sarah from Parramatta who saw a Facebook ad, then searched your name, then bought. It looks at, say, 150 weeks of total sales, total spend per channel, and what else was going on. Then it asks which combination of those inputs best explains the sales line.
Gartner frames the goal as determining the incremental impact of marketing activities and using that to answer strategic questions. That word, incremental, matters. The question is not how many sales the platform claims. The question is how many sales would not have happened without the spend.
The basic equation in plain English
Strip away the maths and an MMM splits your sales into pieces:
- Baseline. Sales you would expect with no marketing at all, from repeat customers, word of mouth, brand strength and general demand.
- Marketing effects. The lift from each channel, such as Google Search, Meta, email, radio or outdoor.
- External factors. Things you don’t control: the economy, weather, competitor activity, school holidays, public holidays.
- Error. Whatever the model can’t explain.
That structure is the common way vendors describe it. For example, Lifesight’s documentation writes it as sales equals baseline plus marketing effects plus external factors plus error.
A useful way to read this: if a plumber’s calls rise every June because of cold snaps and the plumber also lifts Google Ads spend in June, a platform report will credit the ads with the whole rise. A model that includes weather and season tries to separate the two.

Two ideas that make MMM different: carryover and diminishing returns
Advertising rarely pays off the same week you spend. A brand video seen in week one may produce a sale in week four. MMM captures this with what’s called adstock, where a decay rate shows how quickly the effect of each activity fades. Lifesight’s methodology notes describe this as showing how long the effects of a campaign last.
The second idea is saturation. The first $1,000 a week in a channel tends to work harder than the tenth $1,000. A model produces a response curve for each channel, and the useful part is where the curve flattens. Google’s Meridian documentation says MMM-derived outputs such as ROI and response curves can have a causal interpretation, provided the methodology suits this kind of analysis.
Here is a worked example with made-up round numbers, to show the idea only. Suppose a model says the first $5,000 a week in Meta returns strongly, but spend between $5,000 and $8,000 adds very little. That points to holding Meta around $5,000 and testing the extra $3,000 elsewhere. It is a hypothesis to test, not a verdict.
What data you need
IAB Australia’s marketer checklist says to secure data at the most granular level possible, covering sales and revenue, ad exposure and spend, other marketing and promotions, pricing, product, brand measurement and customer data. It also says to set up automated collection and quality checks.
In practice, a starter list looks like this:
- Weekly revenue or orders, ideally by product line or region
- Weekly spend and impressions for every paid channel, including offline
- A record of promotions, price changes and stock-outs
- Seasonality markers: school terms, public holidays, EOFY sales, Black Friday
- Notable one-off events, such as a PR hit, a competitor launch or a website outage
Ipsos MMA says most models are built on weekly data spanning two to five years, and that data quality and completeness directly affect accuracy.
One point trips up many owners. The model learns from change. If you spent a flat $3,000 a month on Google for three years, there is nothing for it to compare. Variation in spend, ideally with some deliberate tests, gives it signal.
How MMM differs from attribution
Attribution follows individual conversions back to touchpoints, such as the last click, or a data-driven split across clicks. MMM works from totals and doesn’t need user-level tracking. Each has blind spots.
| Attribution | Marketing mix modelling | |
|---|---|---|
| Data used | User or click-level tracking | Aggregate weekly sales and spend |
| Good at | Campaign, keyword and ad-level decisions | Cross-channel budget split, including offline |
| Weak at | Offline channels, cookie loss, own-name searches claiming credit | Creative, targeting and campaign-level detail |
| Speed | Daily | Slow, updated weekly to quarterly |
| Needs | Working tracking | Years of history and spend variation |
The IAB Australia Ad Effectiveness Council says MMM should not be used in isolation. It should work alongside attribution models, experimentation and platform analytics, and it is a process of continuous refinement, not a one-off. The marketer checklist says the same: treat MMM as one tool in a broader measurement framework and calibrate it with lift tests.
If you want to see how the attribution side works in a Google account, we cover it in data-driven attribution and when to trust it. For a broader view of how teams measure demand when click tracking gets patchy, see this piece on measuring demand when attribution breaks.
Where MMM helps with budgets
Google’s Australian business site says MMM can help you make investment decisions and regularly reallocate budgets across marketing activities, and that it uses only aggregated data, so it is unaffected by privacy regulations. IAB Australia’s checklist lists tactical and strategic planning, budget allocation, media optimisation, and scenario testing as the main uses.
That last use is the one owners find most practical. You can ask the model what would likely happen to total sales if you moved 15% of budget from one channel to another. The answer comes with uncertainty, and good modellers show you the range.
To use results well:
- Decide the questions before the model is built. For example: should we move spend from Meta to Search, and how much?
- Treat outputs as hypotheses and test them with a budget shift in one region or period.
- Refresh the model on a schedule. Consumer behaviour and media performance change, and IAB says models must be regularly updated. For thinking about keeping plans current as channels shift, see this digital campaign planning framework.
Where MMM runs into trouble for smaller businesses
The maths has a hard constraint. Google’s technical paper points out that three years of national weekly data is only 156 data points, while the model may be asked to estimate 20 or more channels. Parameters can exceed data points, and it cites a rule of thumb of seven to ten data points per parameter for a stable linear regression.
Put simply, a business with three channels and a short history can run a model, but it will have wide error bars. Add more channels and it falls apart.
Geography is the usual fix at scale. A model built across many regions multiplies the observations. A business selling nationally from one website, or a local trade covering a few suburbs, doesn’t have that option. Mastratos explains this in detail, and notes that recommended minimums are two years of weekly data for geo-level models and three years for national ones.
There is a second risk. A model always returns a tidy output: curves, contributions and an allocation recommendation. Falia notes that nothing in the deliverable shows when the data was too thin to support a conclusion. A model on weak data can look as confident as one on strong data.
So before commissioning, check the basics:
- Do you have at least two years of weekly sales and spend history, and can you trust it?
- Has your spend actually varied, or has it been flat?
- Do you run enough channels, and spend enough, to justify the cost of a model?
- Is someone in-house able to read the output and challenge it?
If the answer to most is no, spend your effort elsewhere first.
What to do first if you are not ready
Most Australian small and mid-sized accounts we see have a more basic problem than the lack of a model. Their platforms report conversions that don’t match sales. Fixing that is cheaper than a model and gives you something to act on within weeks.
A sensible order:
- Get conversion tracking right. Make sure form fills, calls and purchases are recorded once each. If tracking is broken, our conversion tracking fix covers what we check.
- Match leads to closed revenue in your CRM. Platform numbers show leads. Your CRM shows which of them paid. Our guide to tying ads to closed-won revenue walks through it.
- Watch a blended ratio. A single number such as marketing efficiency ratio gives an all-channels view with no modelling.
- Run simple experiments. Falia recommends that a small business connect its sales to its leads and run one geographic experiment a year, which tends to teach more than a thin model.
- Tighten the account itself. In search, that means exact and phrase match keywords, tight negatives and a weekly search term review. We don’t recommend broad match for small and medium accounts, because it spends budget on searches that were never going to become customers.
When you have two or three years of clean history and a larger, multi-channel budget, MMM becomes a sensible next layer.
How to get started with MMM in Australia
IAB Australia’s checklist suggests this path:
- Define your objectives and the questions the model must answer.
- Review your current measurement tools and data practices.
- Secure comprehensive data and set up routine collection.
- Involve stakeholders from finance, sales and marketing early.
- Compare vendors through a request for proposal, and ask how they validate the model.
IAB’s December 2025 landscape report notes the Australian market now has a wider variety of models, from traditional regression to Bayesian methods, time series analysis and machine learning. When you compare providers, ask which technique they use, how they handle your short history, and how they calibrate against experiments. Gartner also suggests that if you dismissed MMM years ago because results only came at channel level or quarterly, it may be worth another look.
Where our audit fits
MMM tells you roughly how channels contribute to the total. It can’t tell you which keywords, search terms or ad sets are wasting money inside a channel. That is account-level work, and it is where we spend our time.
Our $99 AUD Google Ads audit looks at your campaign structure, match types, negatives, conversion setup and where spend is going. You get a clear list of fixes whether you later add a model or not. If you want ongoing help, Google Ads management with us starts from $1,725 AUD a month per platform, with no setup fee, no percentage of ad spend and a three month minimum.
Start with the $99 AUD Google Ads audit and we’ll show you what your account is doing with your budget.
Our view on MMM
Jesse here. I like marketing mix modelling when the conditions are right. It asks the right question, which is what the spend added beyond what would have happened anyway. Platforms rarely ask that.
But most of the accounts that reach us are far from needing one. A real estate agency we worked with was told its cost per new client was $300. The true cost was $800, because most conversions were people searching the agency’s own name. No model was needed to find that. We split brand searches from new demand and, within about three months, cost per new client reached $68 and held for 10 months.
A pest control company cut cost per lead from $700 to $100 in about six weeks. We added weekly negative keywords to remove DIY and product searches, lifted the budget from $50 to $100 a day, moved from Maximize Clicks to Maximize Conversions and fixed tracking. Again, no model. Just a senior person reading search terms every week.
My advice: get the account clean, match leads to closed revenue in your CRM, and keep spend moving in a planned way so that history becomes useful. If you reach the point where a model makes sense, you will hand it better data than most businesses can. That is the groundwork we do, and results depend on your market and your account, so we never promise a figure.
Jesse Lees
FAQ
What is MMM in marketing?
MMM stands for marketing mix modelling. It is a statistical analysis of aggregate historical sales and marketing data that estimates how each channel, along with factors like price, promotions and seasonality, contributed to sales. It uses weekly or daily totals, not individual user tracking.
How is MMM different from attribution?
Attribution assigns credit to touchpoints on individual customer journeys. MMM estimates each channel’s contribution from aggregate data across the whole mix, including offline channels. IAB Australia recommends using MMM together with attribution and experiments, not in place of them.
How much data do I need for marketing mix modelling?
Most models use weekly data spanning two to five years, according to Ipsos MMA. Your spend also needs to vary over that time, because a flat budget gives the model nothing to learn from. Data quality matters as much as length.
Is MMM worth it for a small business?
It depends on history, budget and channel count. With under two years of data, flat spend or only one or two channels, a model may cost more than it returns. Many smaller businesses get more from accurate conversion tracking, CRM revenue matching and a simple geographic or budget test.
Sources
- IAB Australia, Market Mix Modelling Landscape (December 2025)
- IAB Australia, MMM Marketer Checklist (2025)
- Gartner, A CMO’s Guide to Marketing Mix Modeling
- Lifesight documentation, Marketing Mix Modelling
- Google Meridian, About MMM as a causal inference methodology
- Google, Challenges and Opportunities in Media Mix Modeling
- Ipsos MMA, What Is Marketing Mix Modeling
- Google for Business Australia, Making profit-driven choices
- Mastratos, Marketing Mix Modeling for a Small Company
- Falia, Marketing mix modelling for a small business
- Crontent, measuring demand when attribution breaks
- MS Nordic, Digital Campaign Planning framework
Recommended
Keep reading
How we can help
Next step
Find out where your ad spend is going.
Get a $99 AUD Google Ads audit. We'll show you where money is being wasted and which leads you're missing out on.
Show me my current ad mistakes →