Consent Mode v2 Setup for Australian Businesses: A Practical Guide

Abstract consent signals across geometric platforms

Consent Mode v2 is a way for your website to tell Google tags what each visitor agreed to, so the tags behave accordingly. Setting it up takes four things: a consent banner that can talk to Google, default consent states that load before any Google tag, an update when the visitor makes a choice, and a proper test of each path. This guide walks through each step the way we do it on client accounts, and covers the question Australian owners ask first: do you need it at all?

I’m Jesse, a senior paid media specialist at Senior Ad Managers. We run Google Ads and Meta Ads for Australian businesses, and consent settings come up whenever a site has European visitors, a global tag setup or a banner someone installed years ago and nobody has checked since.

Senior Ad Managers
senioradmanagers.com
Make Google Ads Data More Reliable
Senior Ad Managers fix conversion tracking first, helping businesses measure campaigns against closed revenue in their CRM.
Get a Google Ads audit

TL;DR

  • Consent Mode v2 adds two signals, ad_user_data and ad_personalization, to the original ad_storage and analytics_storage signals. Google’s requirement is tied to traffic from the European Economic Area (EEA).
  • If your audience is only Australian, Google does not force you to use it. If you sell into Europe or share one tag setup across countries, you should set it up.
  • Basic mode blocks Google tags until the visitor chooses. Advanced mode loads them and sends cookieless pings while consent is denied. Pick based on your legal advice and your click volume.
  • The order matters: set defaults first, fire tags second, update on choice third. Then test accept, reject and partial choices in a clean browser.
  • Australian privacy obligations sit outside Google’s rules. Check your own privacy policy and the Privacy Act separately.

Table of Contents

If your visitors are all in Australia, Google does not require Consent Mode v2 for your account. Google’s requirement is framed around traffic from the EEA: for applicable EEA measurement, ad personalisation and remarketing, advertisers must collect consent and share the signals with Google.

That leaves three groups of Australian businesses who should act:

  • Businesses that sell or advertise into Europe. An online store in Brisbane that ships to Germany and targets it in Google Ads is in scope.
  • Businesses with a global site. If one website and one Tag Manager container serve Australia, the UK and the EU, European visitors will hit your tags whether or not you planned for them.
  • Businesses that want one consistent consent setup. Some owners prefer a single, tidy system over region-specific patchwork. That is a fair choice, and a defensible one.

It also helps to separate two questions. Google’s tag rules are one. Australian privacy law is the other. Consent Mode does not make a site compliant with the Privacy Act 1988 or the Australian Privacy Principles. It only passes visitor choices to Google tags. What you disclose in your privacy policy, and what you collect, is a matter for your legal adviser.

If you are unsure which group you fall into, look at the country report in GA4 for the last 90 days. Any meaningful EEA share means you should treat this as a task for this month, not next year.

The original Consent Mode used two signals: ad_storage and analytics_storage. Google updated it in November 2023. According to Google’s developer documentation, v2 adds ad_user_data and ad_personalization, and sites already using consent mode are told to upgrade.

Here is what the four signals control, in plain terms:

Signal What it governs
ad_storage Whether advertising cookies can be read or written
analytics_storage Whether analytics cookies can be read or written
ad_user_data Whether user data can be sent to Google for advertising
ad_personalization Whether data can be used for personalised ads and remarketing

The new pair is the point. If your banner only sets the older two, Google Ads has no way to know whether a visitor allowed their data to be used for advertising or remarketing. Audiences and conversion measurement can then be limited for EEA traffic.

When the signals are denied, Google can use modelling to fill part of the gap. Google Consent Mode communicates visitors’ cookie choices to Google tags, and for those who decline, Google can estimate behaviour from the visitors who agreed. Modelling is an estimate, not a recovery of individual data, and it has conditions, which we cover below.

Basic or Advanced: which mode to choose

This is the decision that most affects your data. Google’s Analytics Help explains the difference this way: in Basic mode, Google tags are blocked until the visitor interacts with the banner, and nothing is sent beforehand. If the visitor declines, no data is transferred to Google and Google Ads modelling uses a general model.

In Advanced mode, tags load when the visitor arrives and send cookieless pings while consent is denied. That is what allows an advertiser-specific model rather than a general one.

Basic Advanced
Google tags before the visitor chooses Blocked Load, with consent denied by default
Data sent when consent is denied None Cookieless pings
Conversion modelling General model Advertiser-specific model
Setup effort Lower, tags wait for the banner Higher, every tag needs correct consent checks
Fit Stricter legal stance, low click volume Higher volume accounts with advice that supports it

How we think about the choice:

  1. Start with your legal position. Some privacy advisers take a stricter view of anything that fires before a choice is made, even a cookieless ping. If your adviser says Basic, use Basic. Do not choose Advanced for the data and sort out the legal side later.
  2. Look at your click volume. Google’s modelling for Ads needs enough data. Google Ads Help states that consent mode must be implemented correctly and the account needs 700 ad clicks over seven days per country and domain grouping before conversion modelling activates. A small Australian account with a modest European audience may never reach that, so Advanced would add complexity with little modelled benefit.
  3. Check your team’s capacity. Advanced mode only works if every tag respects its consent requirement. A half-finished Advanced setup is worse than a clean Basic one.

For most small and medium accounts we see, where Europe is a minor slice of traffic, Basic is the sensible starting point. You can move to Advanced later if volume and legal advice support it.

The core principle comes straight from Google’s consent mode guide: set a default value for each consent type before consent is granted, then update the state when the visitor interacts. The steps below put that into practice.

You need a consent management platform (CMP) that sends all four signals to Google, ideally one that is certified by Google for use with Google ads products. Free and paid options exist, from built-in tools in website platforms through to dedicated services. We do not recommend one by name, because the right one depends on your site platform, traffic and legal advice.

What matters technically is that the banner sets defaults early, updates the signals when a choice is made, and remembers the choice on later visits. If you want a plain-language primer on how a banner passes visitor decisions to your tags, this overview of user consent management covers the ground well.

Shopper choosing website privacy preferences on phone

2. Set defaults before any Google tag fires

The default consent state must be in place before Google tags load. If a tag fires first, it runs with no consent instruction, which defeats the purpose.

In Tag Manager, most modern banners provide a template that sets the default through the setDefaultConsentState command. Make sure that template fires on the Consent Initialization trigger, which runs before the standard All Pages trigger.

Typical defaults for visitors in regions where you show a banner:

  • ad_storage: denied
  • analytics_storage: denied
  • ad_user_data: denied
  • ad_personalization: denied

Google recommends that you scope defaults to the regions where consent banners are shown. For an Australian site with some European traffic, that usually means a default of denied for EEA country codes, with a separate rule for the rest of the world. What that second rule says for Australian visitors is a privacy decision. Make it with your adviser, and make it deliberately.

In your container, open Admin, then Container Settings, and tick the option to enable consent overview. This gives you a shield icon view of every tag and the consent it needs. It is the fastest way to find tags that have no consent setting at all.

For each tag, open Advanced Settings, then Consent Settings. Google’s own tags, such as the Google Ads conversion tag and GA4, have built-in consent checks. Other tags need a manual entry. The simple rule: each tag should fire only if the consent it needs has been granted.

A practical mapping:

  • Google Ads conversion and remarketing tags: ad_storage, ad_user_data and ad_personalization
  • GA4 configuration and event tags: analytics_storage
  • Third-party pixels, such as the Meta pixel: ad_storage at minimum

If you are still working out which events GA4 should count, our guide to GA4 conversion tracking and key events will help you settle that before you wire up consent.

5. Set a short wait for the banner

The wait_for_update parameter, commonly set to 500 milliseconds, tells Google tags to hold briefly while the banner reads a returning visitor’s saved choice. Without it, a returning visitor who already accepted may be treated as denied on the first page load, and that first page view is lost.

6. Update the state when the visitor chooses

When the visitor accepts, rejects or customises, the banner must call the update command with the new values. Banner templates do this for you, but check that all four signals are included. An older template that only updates two will silently leave ad_user_data and ad_personalization at denied.

7. Check the Google Ads and GA4 sides

In Google Ads, confirm that your conversion actions are active and that your tag status is recording. In GA4, check that your data collection settings are as you expect. If your Google Ads conversions looked odd before you started, fix that first. A consent layer on top of broken conversion tracking only makes it harder to work out what is wrong. Our GA4 audit checklist is a good place to start.

How to test your setup

Testing is where most setups fail. A banner that looks right can still send the wrong signals, so test every path.

Use a fresh browser session with no saved consent choice, such as a new private window, for each test. Run these scenarios:

  1. Reject all. Load the site, reject everything, and confirm that the tags requiring consent do not fire. In Basic mode, Google tags should not load at all. In Advanced mode, you should see cookieless pings only.
  2. Accept all. Accept, then confirm the Google tags fire and that all four signals show as granted.
  3. Partial choice. Accept analytics but reject advertising, and confirm GA4 fires while the Google Ads remarketing tags do not.
  4. Returning visitor. Reload and visit a second page. The saved choice should apply from the first page load.
  5. Change of mind. Use the banner’s settings link to reverse the choice and confirm the signals update.

Tools to use:

  • Tag Assistant preview mode shows the consent state on each event: the default state, and the update when the visitor chooses.
  • Browser developer tools let you watch network requests. In Advanced mode, look for the pings sent while consent is denied.
  • GA4 DebugView confirms events arrive as expected.

Common faults we look for:

  • The default state tag fires on All Pages instead of Consent Initialization, so some tags fire too early.
  • The banner sets only analytics_storage and ad_storage, leaving the two new signals untouched.
  • A hard-coded tag outside Tag Manager, from an old plugin or theme, ignores the consent setup completely.
  • Defaults are set for all regions, so Australian visitors see different behaviour from what the owner intended.

If you run server-side tagging or Meta’s Conversions API, consent decisions need to be passed through those routes too. Our server-side tracking setup covers how that fits together.

What happens to your data when visitors say no

Expect gaps. When consent is denied, Google cannot see those visitors in the usual way. Modelling can estimate some of what is missing, but it is not guaranteed and it depends on volume, as the 700 click threshold above shows.

What this means in practice for an Australian advertiser:

  • Reported conversions may dip for European traffic after you introduce a banner, because some visitors decline. That is a change in measurement, not necessarily a change in demand.
  • Remarketing lists for EEA visitors may shrink, because only those who grant ad_personalization can be added.
  • Smart Bidding learns from what it can see. If conversion volume drops sharply, bids can become less stable for a while.

This is why we compare platform numbers with actual sales when a consent banner goes live. If leads and revenue in your CRM hold steady while Google Ads reports fewer conversions, the banner changed what is counted, not how well the campaigns work. Our guide to offline conversion tracking explains how to feed closed sales back to Google Ads.

When you review the numbers, a good marketing campaign analytics routine helps you decide which figures to watch before and after the change, so you can tell a consent effect from a campaign problem.

Australian privacy obligations to check separately

Consent Mode is a Google tool. It does not replace your obligations under the Privacy Act 1988 and the Australian Privacy Principles if your business is covered by them. The Office of the Australian Information Commissioner (OAIC) publishes guidance on tracking technologies such as pixels, and it is worth reading if you run Google, Meta or other tags on your site.

Three practical points for owners:

  • Keep your privacy policy accurate. It should describe the tracking tools you use, including advertising pixels and what you do with the data.
  • Match your banner to your policy. If your policy says visitors can opt out, the banner has to make that work.
  • Treat sensitive information carefully. Health, legal and financial businesses should take advice before sending any page or event data to ad platforms.

Privacy reform has been moving through federal parliament, so expectations may tighten. Ask your legal adviser what applies to your business now, and review it each year.

Where we can help

Consent Mode is a measurement job, and we handle measurement before we touch campaigns. If your Google Ads conversions look wrong, or you are not sure your banner is passing the right signals, our Website Tracking service covers the setup and checks.

For ongoing campaigns, our Google Ads management starts at $1,725 AUD per month per platform, with no setup fee, no percentage of ad spend and a 3 month minimum. Senior specialists run every account, with weekly search term reviews using phrase and exact match keywords and tight negatives.

Senior Ad Managers

The quickest way to see where you stand is our $99 AUD Google Ads audit. We review your tracking, conversion actions and search terms, and tell you what to fix first.

Perspective: fix the count before you read the count

We see the same pattern whenever a banner goes live. Reported conversions move, the owner worries, and someone blames the campaigns. Most of the time the campaigns did not change. What changed is how many visitors Google is allowed to see.

Our view is simple. Get consent set up correctly once, with defaults before tags, all four signals passing, and every tag checked. Then judge your ads against closed revenue in your CRM, not against whatever the platform reports on a given week. A platform number can tell a good story. A sales ledger tells you what happened.

For small and medium Australian accounts, we would rather see a clean Basic setup than a rushed Advanced one. Google’s modelling needs volume, and a small account often has little to model. Spend that attention on tight exact and phrase match keywords, weekly search term reviews and conversion actions that match real enquiries. That is where budgets are won back.

If you are unsure whether your tags are firing the way you think, that is a job for a senior person with the container open, not a guess.

Jesse Lees

FAQ

Google’s requirement is linked to traffic from the EEA, so a purely Australian audience does not trigger it. If you advertise to Europe or run one site and tag setup across regions, you should set it up. Australian privacy obligations are a separate matter to raise with your legal adviser.

In Basic mode, Google tags are blocked until the visitor makes a choice, so no data is sent beforehand. In Advanced mode, tags load and send cookieless pings while consent is denied, which supports an advertiser-specific model. The right choice depends on legal advice and click volume.

In practice, yes. A banner that collects the visitor’s choice and passes all four signals to Google is the simplest way to meet the requirement. Choose one that supports Consent Mode v2 and works with your website platform and Tag Manager.

Open Tag Assistant in preview mode and load your site in a fresh browser session. You should see the default consent state first, then an update when you accept or reject. Test accept all, reject all and a partial choice, and confirm that tags fire or stay quiet as expected.

It can, for visitors who decline consent. Modelling may recover part of the gap if you meet Google’s conditions, but it is not guaranteed. Compare platform numbers with your CRM sales so you can tell a measurement change from a campaign change.

If you want a senior specialist to check your consent and conversion setup, book the $99 AUD Google Ads audit.

Sources

Senior Ad Managers
Ask About Your Consent Setup
Email Senior Ad Managers with questions about tracking and Google Ads measurement for your Australian business.
J
Jesse · Senior Ad Managers
Founder of Senior Ad Managers, a Melbourne performance marketing agency. Manages paid search across AU, NZ & US accounts.

Want a $99 AUD audit of your account? →

Next step

Find out where your ad spend is going.

Get a $99 AUD Google Ads audit. We'll show you where money is being wasted and which leads you're missing out on.

Show me my current ad mistakes →
CallContact Us